Split Rod Wiper

Split Rod Wiper

1. Split Rod Wipers, also known as split drill rod scrapers it is a wear-prone sealing component for horizontal directional drilling rigs the main body is typically made of wear-resistant polyurethane and made of rubber with an open split structure there is no need to dismantle the entire drill pipe can be directly installed on the outer wall of the drill pipe usually installed at the entrance of the drilling machine mainly used for cleaning the mud adhering to the surface of the drill pipe prevent sediment from entering the internal part of the power head protect the drive spindle protecting the short sections the main components are protected from being damaged by mud erosion

   

2. During the drilling and pulling-back operations drilling rods covered in mud the reciprocating movement of the drilling machine when the drill pipe slides past the split rod wiper the mud adhering to the surface the rock fragments were scraped off by the sharp edge prevent the slurry from flowing down the drill pipe introduce the power head cavity continuous sediment isolation prevent particle impurities from wearing down the main unit’s threads seal assembly by relying on the elastomer to closely adhere to the outer wall of the drill pipe continuous mud removal protection is carried out during the movement of the drill rod
3. Before construction, open the opening of the Split Rod Wipers directly stuck on the drill rod fixed at the entrance of the drilling rig drilling and bearizing during the process of pulling back the pipeline the drill rod kept sliding back and forth continuously scrape off the mud on the surface of the drill rod regular inspection to observe the degree of wear on the cutting edge when the sludge scraping effect declines when there is tearing and deformation occurs directly disassemble the old parts and replace them the opening design does not require the removal of the drill string easy and quick replacement significantly reduce on-site downtime time
4. Applied to horizontal directional drilling engineering for HDD installed at the entrance and exit of the drilling rig remove the drilling mud and rock debris carried out by the drill rod prevent sediment from entering the internal part of the power head protect the core drilling tool accessories reduce the wear and tear of the mainframe widely used in gas applications and water supply and drainage and underground optical cable pipeline crossing project it is a commonly used and easily damaged component at the construction site
5. Disassembly assembly and replacement do not require removal of the drill rod simplicity of operator shorten the duration of downtime polyurethane material is wear-resistant and tear-resistant resistant to corrosion by drilling mud longer service life and a wide range of models adapt to different sizes of drill rod strong commonality